Jet-tools DC-1200A Manuel d'utilisateur

OWNER'S MANUALDC-1200A Dust CollectorJET EQUIPMENT & TOOLS, INC. P.O. BOX 1349 Phone:253-351-6000A WMH Company Auburn, WA 98071-1349 Fax: 1-8

10Parts Breakdown

11Parts List for the DC-1200AIndex PartNo. No. Description Size Qty.1...411035W ... Impeller Housing...

12Wiring Diagram For 3 Phase 230V/460V Dust CollectorWiring Diagram For Single Phase 230V Only Dust Collector

2This manual has been prepared for the owner and operators of JET’S DC-1200A. Its purpose, aside frommachine operation, is to promote safety through t

3WARNING1. Read and understand the entire contents of this manual before attempting assembly oroperation. Do not use this machine until proper trainin

4Specifications: DC-1200A-1 DC-1200A-3Stock Number... 708634 ...

5WARNINGRead and understand the entire contents ofthis manual before attempting assembly oroperation of the dust collector!Failure to comply may cause

6Assembly1. Install four casters to the under side of thebase as pictured in Fig. 1. Thread the hexnut (B, Fig. 1) onto the caster shaft. Thenslide th

74. Attach three support brackets (A, Fig. 4) tothe base using six M8 x 16 hex cap boltsand six M8 flat washers (B, Fig. 4). Handtighten only at this

87. Slide the bag hanger hook (A, Fig. 7)through the top loop of the filter bag. Insertthe hanger into the hanger bracket. Threadthe retainer strap (B

9MaintenanceWARNINGNever perform maintenace on this machinebefore turning switch off and removing plugfrom power source, unplug.Failure to comply may